How to configure a Modem

• These are the steps you have to follow to configure a Modem.

Step 1: Login

• Open your default browser and type a default IP in URL and press Enter. Example 192.168.0.1.
• Enter default username and password is admin.

• Click OK. Now you will be on modem configuration page.

Step 2: Click on Configuration Tab

• Now click on Internet Connection to configure Internet on BSNL Teracom modem.

Step 3:

• If you have old connections, delete old connections else you can move to Step 4.
• You can see a number of pre-configured connections on this page.
• You should delete all of them by press delete button.

Step 4: Add new connection

• Now click on Add button on the bottom of the page to create a new connection.

• Now add following parameters:
• PVC Name: PVC0
• VPI : 0
• VCI : 35
• Service Category : UBR with PCR
• Keep all other default information and click Next.

Step 5: Select BSNL Connection Type

• Now select PPP Over Ethernet (PPPoE) and LLC/ SNAP and click Next.

Step 6: Configure WAN IP Settings

• Select the option Obtain an IP Automatically. Make sure the check boxes Enable NAT and Add Default Route are checked and click Next.

Step 7: Set User Name and Password

• Type the User Name and Password provided by BSNL. You can type the service name as BSNL Internet.

• By pressing Next you will reach summary page. Click on Apply.

Step 8: Reboot BSNL Modem

• Click on Admin tab and then click on Reboot.